(c) 2007-2013 Microtelecom s.r.l. - Pavia di Udine, Italy
All Rights Reserved
All Rights Reserved
All the pictures, the photos and text in this site is property of Microtelecom s.r.l. or licensed to it and only to it. If you copy, manipulate, publish in any form the material here presented you are infringing author's copyrights.
Microtelecom reserves the right to pursue unauthorized users of the content of this site. If you violate our intellectual property you may be liable for: actual damages, loss of income, and profits you derive from the use of the content of this site.
Microtelecom reserves the right to pursue unauthorized users of the content of this site. If you violate our intellectual property you may be liable for: actual damages, loss of income, and profits you derive from the use of the content of this site.
PERSEUS CONTROL SOFTWARE V4.0c
The new V4.0c software version allows connecting to remote Perseus receivers through any TCP/IP connection*.
All addressed issues are listed and commented in the database section of the Perseus support group hosted on Yahoo.
Please note that USB 3.0 support is not ready yet, so a USB 2.0 port must be used to allow stable operation of the receiver.
NOTE (*) The minimum required upload bandwidth on the server side is 80 kbps. Three profiles were defined to simplify server setup (GPRS, ADSL, LAN). Operation behind a router is possible after setting up the correct port forwarding rules.
For more information about the new client-server architecture and setup, please refer to the Client-Server Reference PDF file included in the 4.0c zipped file.
The new V4.0c software version allows connecting to remote Perseus receivers through any TCP/IP connection*.
All addressed issues are listed and commented in the database section of the Perseus support group hosted on Yahoo.
Please note that USB 3.0 support is not ready yet, so a USB 2.0 port must be used to allow stable operation of the receiver.
NOTE (*) The minimum required upload bandwidth on the server side is 80 kbps. Three profiles were defined to simplify server setup (GPRS, ADSL, LAN). Operation behind a router is possible after setting up the correct port forwarding rules.
For more information about the new client-server architecture and setup, please refer to the Client-Server Reference PDF file included in the 4.0c zipped file.
DOWNLOAD AREA
NEW Perseus Software v4.0c (13 Feb. 2013 - 7.76 MB .zip file)
Release notes are included in the zipped package. This release works as a fully featured demo version for a month, for those who don't own a Perseus receiver.
FM+ Software v1.0c (5 October 2011 - 2.24 MB .zip file)
You will need the activation code printed on the original CD to activate your copy (requires registration and the FM+ converter if used either than in playback mode).
Perseus USB Drivers (6 Feb. 2010 - 12 MB .zip file)
with Drivers installation guides.
The latest copy of the Microtelecom SDRDK is available here
(Once the Microtelecom SDRDK Licensing agreement conditions are accepted you will receive a personal notification e-mail with a link to the SDRDK download page)
ExtIO DLL for Studio1 - Winrad (18 July 2012 - 1.6 MB .zip file)
Updated with latest FPGA cores and DLL (includes support for all Perseus output sampling rates).
Perseus User Manuals
Japanese (1 Jan. 2009 - 3 MB .pdf file)
Japanese (Short Guide) (1 Jan. 2009 - 0.5 MB .pdf file)
English (24 Mar. 2009 - 3 MB .pdf file)
Italian (10 Dec. 2008 - 3 MB .pdf file)
NEW Finnish (11 Feb. 2013 - 1.6 MB .pdf file)
courtesy of Jari Perkiömäki, OH6BG
German (23 June 2008 - 11 MB .pdf file)
CI-V Interface reference (30 November 2012 - 309 kB .pdf file)
NEW Perseus Software v4.0c (13 Feb. 2013 - 7.76 MB .zip file)
Release notes are included in the zipped package. This release works as a fully featured demo version for a month, for those who don't own a Perseus receiver.
FM+ Software v1.0c (5 October 2011 - 2.24 MB .zip file)
You will need the activation code printed on the original CD to activate your copy (requires registration and the FM+ converter if used either than in playback mode).
Perseus USB Drivers (6 Feb. 2010 - 12 MB .zip file)
with Drivers installation guides.
The latest copy of the Microtelecom SDRDK is available here
(Once the Microtelecom SDRDK Licensing agreement conditions are accepted you will receive a personal notification e-mail with a link to the SDRDK download page)
ExtIO DLL for Studio1 - Winrad (18 July 2012 - 1.6 MB .zip file)
Updated with latest FPGA cores and DLL (includes support for all Perseus output sampling rates).
Perseus User Manuals
Japanese (1 Jan. 2009 - 3 MB .pdf file)
Japanese (Short Guide) (1 Jan. 2009 - 0.5 MB .pdf file)
English (24 Mar. 2009 - 3 MB .pdf file)
Italian (10 Dec. 2008 - 3 MB .pdf file)
NEW Finnish (11 Feb. 2013 - 1.6 MB .pdf file)
courtesy of Jari Perkiömäki, OH6BG
German (23 June 2008 - 11 MB .pdf file)
CI-V Interface reference (30 November 2012 - 309 kB .pdf file)
SOFTWARE TOOLS AND LINKS
Alex Shovkoplyas, VE3NEA's CW Skimmer Page
Joe Taylor, K1JT's WSJT Home Page
Alberto di Bene, I2PHD's Winrad
Mario Tnubel, DG0JBJ's WinradHD
Leif Asbrink, SM5BSZ's Linrad
Willi Passman's SDR Radio Portal
Jeffrey Pawlan, WA6KBL's Winrad.Org
Wolfgang Buescher, DL4YHF's Spectrum Lab
Michael Feilen's Ratemonkey
Ratemonkey is a real time sample rate converter developed by Michael when working to the DRM+ transmitter project leaded by Prof. Dr. Andreas Steil at the Univerisity of Applied Science, Kaiserslautern, Germany.
"Last month I had some time to develop an application called Ratemonkey which does realtime sample rate conversion using the Perseus Receiver or a wave file as input device. The output samples can be streamed either over UDP or they can be written to a wave file. With Ratemonkey it becomes possible to use the Perseus Receiver at arbitrary integer samplerates between 1MHz and 100Hz. The resampled data can be send in realtime over UDP to process it with your own application. We needed use the application for our DRM+ research and I must say that Perseus does a great job here!" - Michael Feilen.
Alessio Miani's Perseus Record Scheduler
Alex Shovkoplyas, VE3NEA's CW Skimmer Page
Joe Taylor, K1JT's WSJT Home Page
Alberto di Bene, I2PHD's Winrad
Mario Tnubel, DG0JBJ's WinradHD
Leif Asbrink, SM5BSZ's Linrad
Willi Passman's SDR Radio Portal
Jeffrey Pawlan, WA6KBL's Winrad.Org
Wolfgang Buescher, DL4YHF's Spectrum Lab
Michael Feilen's Ratemonkey
Ratemonkey is a real time sample rate converter developed by Michael when working to the DRM+ transmitter project leaded by Prof. Dr. Andreas Steil at the Univerisity of Applied Science, Kaiserslautern, Germany.
"Last month I had some time to develop an application called Ratemonkey which does realtime sample rate conversion using the Perseus Receiver or a wave file as input device. The output samples can be streamed either over UDP or they can be written to a wave file. With Ratemonkey it becomes possible to use the Perseus Receiver at arbitrary integer samplerates between 1MHz and 100Hz. The resampled data can be send in realtime over UDP to process it with your own application. We needed use the application for our DRM+ research and I must say that Perseus does a great job here!" - Michael Feilen.
Alessio Miani's Perseus Record Scheduler
SOFTWARE DEFINED RADIO DEVELOPMENT TOOLKIT
Are you interested in processing the wideband zero-IF data stream offered by the Perseus receiver and control the receiver with your own application software?
Microtelecom has developed a simple yet powerful SDR Development Toolkit (SDRDK) which allows you to interface your software to the Perseus receiver hardware directly.
The Microtelecom SDRDK includes C language APIs, control DLLs for Windows, FPGA configuration files images and a tutorial console application which explains step by step how to interface to the Perseus receiver and get out of it the data you're interested in.The SDRDK compiles with Microsoft Visual Studio C++ 5.0 or higher on Microsoft Windows XP and Windows Vista.
Please note that the SDRDK does not contain any digital signal processing code, either in source form or executable. The SDRDK is not meant for filtering, demodulating or any other signal processing task. It simply provides you the means to control the Perseus receiver and get the wideband zero-IF data stream as it comes out of the receiver digital down converter (24 bit IQ samples, from 125 kS/s to 2 MS/s).
The development toolkit is offered for free to those who request it under the terms of the Microtelecom SDRDK Licensing Agreement.
Are you interested in processing the wideband zero-IF data stream offered by the Perseus receiver and control the receiver with your own application software?
Microtelecom has developed a simple yet powerful SDR Development Toolkit (SDRDK) which allows you to interface your software to the Perseus receiver hardware directly.
The Microtelecom SDRDK includes C language APIs, control DLLs for Windows, FPGA configuration files images and a tutorial console application which explains step by step how to interface to the Perseus receiver and get out of it the data you're interested in.The SDRDK compiles with Microsoft Visual Studio C++ 5.0 or higher on Microsoft Windows XP and Windows Vista.
Please note that the SDRDK does not contain any digital signal processing code, either in source form or executable. The SDRDK is not meant for filtering, demodulating or any other signal processing task. It simply provides you the means to control the Perseus receiver and get the wideband zero-IF data stream as it comes out of the receiver digital down converter (24 bit IQ samples, from 125 kS/s to 2 MS/s).
The development toolkit is offered for free to those who request it under the terms of the Microtelecom SDRDK Licensing Agreement.
SOFTWARE OPTIONS
External Down-Converter Software Option License
This software option is available at the price of 32.5 Euro
(+ 21% VAT for users in the European Community).
Please note that this option will enable converter options on the Perseus software only.
Free license file for ONE additional PC
A single additional license file for every bought license is available for free to users that already applied for the external down-converter software option license and wish to use the option on an additional computer.
External Down-Converter Software Option License
This software option is available at the price of 32.5 Euro
(+ 21% VAT for users in the European Community).
Please note that this option will enable converter options on the Perseus software only.
Free license file for ONE additional PC
A single additional license file for every bought license is available for free to users that already applied for the external down-converter software option license and wish to use the option on an additional computer.
