Frequency
coverage
|
1.6-2.0, 3.5-4.0,
7.0-7.3, 10.0-10.2, 14.0-14.5,
18.0-18.2, 21.0-21.6, 24.8-25.0, 28.0-28.8 MHz (see note
1)
|
Modes
of operation
|
Single sideband suppressed
carrier (USB/LSB),
CW,
TUNE (with internal two tone generator) |
Tuning
steps
|
1 Hz, 10 Hz, 100 Hz,
1 KHz
|
Frequency
accuracy
|
+/- 2 ppm typ.
(+/- 60 Hz at +25°C after cold start)
|
Frequency
stability
|
+/- 10 ppm typ. (-10°C
/ + 60°C)
|
Power
requirements
|
+ 13.8 VDC, negative
ground, built-in reverse polarity protection
|
Current
consumption
|
0.8 A Stand by,
2.2 A SSB (10W pep output),
3.5 A CW (10 W output)
|
Transmit
duty cycle
|
100 % (SWR < 2:1,
T < 40 °C)
|
Output
Power
|
10, 5, 2, 1, 0.5, 0.2,
0.1 Wpep (SSB/TUNE),
10, 5, 2, 1, 0.5, 0.2, 0.1 W (CW)
|
Antenna
impedance
|
50 Ohm
|
Load tolerance
|
2:1 or better SWR recommended
|
Carrier suppression
|
Better than 70 dB
|
Unwanted sideband
suppression
|
Better than 70 dB
|
Spurious emissions
|
Better than -60 dBc
|
Harmonic emissions
|
Better than -50 dBc
|
Audio frequency response
|
-0.5 dB (300 - 2700 Hz),
phase linear,
> -70 dB (0 - 3000 Hz)
|
Audio input impedance
|
10 KOhm
|
Audio A/D converter
|
1-bit, 6 Msps sigma delta
|
RF D/A converter
|
14-bit, 90 Msps
|
CW keyer
|
Automatic "slap" mode
(Manual/externall keyer supported),
semi break-in
|
CW keyer speed
|
from 10 to 50 WPM
|
Size
|
6.2 H x 16.5 W x 18.5
D cm (Cabinet)
6.2 H x 16.5 W x 22.0 D cm (Overall)
|
Weight
|
980 g
|
Note: 1. The
Digimit 2002 covers the entire HF range, from 1 MHz up to 30 MHz. Performances
are granted only on amateur band limits.
|
